✨ rESP8266WiFi v.1.61: new WiFi.Connect4 method with connection timeout B4R
rESP8266WiFi v.1.61: new WiFi.Connect4 method with connection timeout
@peacemaker · 2025-08-31v2025-08-31
✨ rESP32Servo B4R
rESP32Servo is an open-source servo motor library for ESP32-based boards only (ESP8266 and AVR not supported). It has been built up-on the B4R internal library rServo (AVR-based boards) and extended for ESP32-based boards by wrapping the library ESP32Servo.
@rwblinn · 2025-08-21v2025-08-21
✨ rConvert B4R
rConvert is a lightweight, open-source helper library for B4R that provides practical conversion routines often needed when working with micro-controllers, sensors, and communication protocols. It includes simple methods for converting between: - Unsigned integers (UInt, ULong) and byte arrays - Floats and byte arrays (IEEE 754) - Numbers and formatted strings - Bytes and hexadecimal strings - Common convenience helpers (e.g. On/Off > Boolean)
@rwblinn · 2025-08-16v2025-08-16
✨ rBLEClient ESP32 B4R
rBLEClient is an open-source library for connecting to or scanning Bluetooth Low Energy (BLE) peripherals.
@rwblinn · 2025-08-13v2025-08-13
✨ ESP32-RMT-puls B4R Library B4R
This is a B4R library for generating TX pulse signals using the RMT module of the ESP32.
@tonigau · 2025-08-04v2025-08-04
✨ raWOT B4R
I was looking for a web server working with B4R and i found a good candidate with aWOT library for arduino.
@candide · 2025-07-22v2025-07-22
✨ rBit32.b4xlib: 32-bit bitwise operations library for Ulong type B4R
rBit32.b4xlib: 32-bit bitwise operations library for Ulong type
@peacemaker · 2025-07-11v2025-07-11
✨ rSHT20 B4R
rSHT20 is an open source library to read the temperature (°C) & humidity (%RH) from an SHT20 sensor.
@rwblinn · 2025-06-26v2025-06-26
✨ rESP32LEDControl B4R
rESP32LEDControl is an open source library to set the state/brightness of an LED connected to an ESP32 using selective functions from the Arduino-ESP32 LEDC API.
@rwblinn · 2025-06-13v2025-06-13
✨ rLovyanGFXEx ESP32 B4R
rLovyanGFXEx ESP32
@rwblinn · 2025-06-08v2025-06-08
✨ rIRRemoteEx B4R
Library for sending & receiving of infra-red (IR) signals
@rwblinn · 2025-06-06v2025-06-06
✨ rArduino_JSON B4R
Process JSON in your Arduino sketches
@candide · 2025-04-30v2025-04-30
✨ rESP32Watchdog B4R
rESP32Watchdog is an open source ESP32 hardware watchdog: - A minimal and flexible ESP32 hardware watchdog implementation using B4R, complete with EEPROM-based crash reason logging and runtime test simulations. - Hardware watchdog timer with configurable timeout. - Periodic feeding of the watchdog in the main loop. - Persistent logging of reset reason in EEPROM. - Simulation of common failure modes: - Infinite loops. - Stack overflows. - Explicit system crashes. - Optional cloud communication using HTTP (for demonstration).
@rwblinn · 2025-04-22v2025-04-22
✨ rVEGA_SH1106 B4R
A wrapper for the VEGA_SH1106 library
@candide · 2025-04-07v2025-04-07
✨ ILI9488 tft Library B4R
This library is for support for the 320x480 tft controller over 4 wire SPI. It is based heavily on the Adafruit_ILI9341 library and is designed to work with the Adafruit_GFX library.
@candide · 2025-04-07v2025-04-07
✨ rBLEServer for ESP32 B4R
rBLEServer for ESP32
@rwblinn · 2025-03-10v2025-03-10
✨ rBLEBeacon ESP32 B4R
rBLEBeacon is an open source library to create a Bluetooth Low Energy (BLE) Eddystone Beacon based on ESP32.
@rwblinn · 2025-02-24v2025-02-24
✨ rESP32RGBLEDC B4R
rESP32RGBLEDC is an open source library to set the color of a RGB LED connected to an ESP32 using the Arduino-ESP32 LEDC API.
@rwblinn · 2025-02-10v2025-02-10
✨ rCAN library B4R
The library makes it simple to communicate between Arduinos AND ESP32s using a 2 wire CAN bus. (fx. 100KBS at 1000m)
@janderkan · 2025-01-26v2025-01-26
✨ fauxmoESP library for B4R: Amazon Alexa support for ESP8266, ESP32 B4R
fauxmoESP library for B4R: Amazon Alexa support for ESP8266, ESP32
@candide · 2025-01-09v2025-01-09